We recommend replacing the baby bottles every four to six months, baby teats every two to three months and cartridges every three months.
If that happens, you should unplug the heater from the energy source, wait for 10 seconds and plug it in again.
Yes. For now you can connect your Sleepy Bottle to a 12 V car charger with attached USB cable. The heating will depend on a quality of your USB car plug adapter. To avoid this problem, we will introduce the Sleepy Bottle car charger in couple of months. For the optimal heating we suggest you use that one.
For optimal operation we recommend you to use no less than 2.1 A and 20000 m/Ah power bank.
Parts of Sleepy Bottle, like baby bottle, both parts of cartridge, teat, teat ring and teat cover are dishwasher safe. Those parts are also boiling water and sterilizer safe.
All of the
materials are safe. They are certified, non-toxic and appropriate to use in
contact with food.
All of the parts that are in contact with baby formula (baby bottle, both parts of cartridge, teat ring, teat in its cover) are BPA free and certified with EN 14350 standard.
The whole Sleepy Bottle assembly measures 23 cm in height and is 9 cm wide. The whole device with heater weights 300 grams, it is very light weight designed for traveling. Without the heater (only bottle, cartridge and baby teat with its cover), it is 21 cm high and 7.8 cm wide. The weight is about 120 grams.
It depends on the initial temperature of the water, quantity of the water and charging type. Using wall charger, will take about 30 minutes.
Sleepy Bottle is designed for bedroom use. That is why, we integrated the system which turns off LED indicating lights after a 15 seconds time period. If you need to see how much time Sleepy Bottle needs to get to the perfect temperature, just tilt it a bit and the lights will come back on.
Not at all. Sleepy Bottle works without any noise at all.
It is best to use as fresh water as possible but under no circumstances use water that had been sitting in the heater for more than 10 hours. If that happens, the heater will let you know you need to replace the water by blinking all five LED lights. Replace the baby formula in the cartridge as well.
No. We advise you to use Sleepy Bottle only for heating the previously boiled and cooled down water.
No. Please never do that. If you do that, the bacteria in the baby formula will grow very fast and there will be significant nutrient losses. You will expos your baby to malnutrition and infection. So please use Sleepy Bottle according to instructions.
No. Please never do that. If you do that, the bacteria in the baby formula will grow very fast and there will be significant nutrient losses. You will exposes your baby to malnutrition and infection. So please use Sleepy Bottle according to instructions.
Yes. The way Sleepy Bottle works is “Always plugged in always ready”. That means, you have the heater plugged into electricity all the time. What we advise you to do is to have couple of baby bottles with water and baby formula set up next to the heater. After using one, you put in the other one and repeat the process. Just make sure that the water is not sitting in the bottle for more than 10 hours.
Sleepy Bottle is not limited to home use only. It is a great travel companion as well. Take it out and about and use power bank for charging it. Just make sure to check the instructions for correct power bank specifications.
Sleepy Bottle was designed so you won’t have any troubles cleaning it. It has no hidden edges so that bottle and cartridge won’t have any leftover formula stuck in it. You can wash it with clean running water, mild soap and kitchen towel, you can wash it in a dishwasher or boil the parts in boiling water for 5 minutes. We advise you to use sterilizer after you wash every washable part (check Sleepy Bottle instructions).
If your child was born premature, with low birth weight or is immune deficient or less than two month old, please consult your family doctor before using Sleepy Bottle.
No. Sleepy Bottle will work properly using only Sleepy Bottle baby bottles.
Sleepy Bottle is made to fit and will perform best using our own brand baby teats. We understand that sometimes the baby can refuse the teat from one brand, that is why Sleepy Bottle is compatible with Avent classic baby teats and BIBI basic care baby teats.
Yes. Sleepy Bottle is designed so you can use different formula brands and types. For optimal use, we advise you to check the instructions of baby formula manufacturer.
Sleepy Bottle is a very versatile device when it comes to baby formula preparation. Not only you can use it for the night time as well as day time feedings, but since it is a low voltage, energy efficient device, you can use different sources for charging it. When at home, we advise you to use 24W charger provided by Sleepy Bottle. Sleepy Bottle is not limited to home use only. It is a great travel companion as well. Take it out and about and use power bank for charging it. Just make sure to check the instructions for correct power bank specifications.
Take Sleepy Bottle out of the box and wash and sterilize all washable parts (baby bottle, both parts of the cartridge for baby formula, baby teat, baby teat ring and baby teat cover). Make sure you completely dry them before you put them to use. Plug the charger into a wall outlet and in to Sleepy Bottle heater. It will take up to 10 seconds for heater to calibrate. When you see the middle amber light “breathing” (slowly turning on and off) the heater is ready for you to insert the baby bottle. You can only use heater when baby bottle is completely assembled (baby bottle, cartridge, baby teat and baby teat cover).
Be sure you read the instructions before using it.